Erig for Dabs and Herbs

Erig for Dabs Setup Option - Instruction Manual

With Dabs/ Concentrate Atomizer installed, the Ripper E-Rig will auto-detect dabs setup and operate with following options:

• 5 x Click to power ON / OFF
• 1 x Click to change the temperature settings indicated by LED color beam
• BLUE (Low) 437 F / 225 C
• GREEN (Med) 445 F / 235 C
• RED (High) 473 F / 245 C
• WHITE (Max) 509 F / 265 C
• 2 x Click to Start Heating
• - E-rig will vibrate for second and generate fading LED lights during (about 10 seconds) heat-up of atomizer to desired temperature (2 x click to stop process at any time)
• - Unit will vibrate again for one second once the desired temperature is reached. Then it will maintain the constant temperature for 50 second full heating cycle

Dry Herb E-Rig Setup Option - Instruction Manual

With Dry Herb Ceramic Heating Chamber installed, the E-Rig will auto-detect this setup and operate with following options:

• 5 x Click to power ON / OFF
• 1 x Click to change the temperature settings indicated by LED color beam

• BLUE (Low) 374° F / 190 C
• GREEN (Med) 392 F / 200 C
• RED (High) 410 F / 210 C
• WHITE (Max) 428 F / 220 C
• 2 x Click to Start 4 Minutes Heating Cycle at Chosen Temperature. The E-Rig unit will vibrate for a second and generate fading LED colored lights during the entire HRB heating cycle.